How To Clean A Canon Mp560 Ink Absorber

• Contents
• Table of Contents
• Troubleshooting
• Bookmarks

  Also See for Canon Pixma MP560

  Related Manuals for Canon Pixma MP560

  Summary of Contents for Canon Pixma MP560

• Folio ane PIXMA MP560 SERVICE MANUAL Canon Copyright 2009, Canon United states of americaA. This technical publication is the proprietary and confidential information of Canon U.Southward.A. which shall be retained for reference purposes past Authorized Service Facilities of Canon UsaA. Its unauthorized use is prohibited.

• Folio 2: Table Of Contents

  MP560 TABLE OF CONTENTS 1. MAINTENANCE one-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables past Service Engineer 1-2. Customer Maintenance 1-three. Special Tools i-4. Sensors 1-5. Series Number Location 2. List OF ERROR Brandish / TROUBLESHOOTING 2-1. Operator Telephone call Errors two-2.
• Page 3 four-three. Grease Awarding 4-four. Special Notes on Servicing (1) Print head problem (2) Newspaper feed motor adjustment (3) Carriage unit of measurement replacement (4) Document pressure sheet (sponge sheet) replacement (5) Ink absorber counter setting 4-5. Verification Afterward Repair (1) Standard inspection flow (2) Service test print (3) Ink absorber counter value print v.

• Folio 4: Maintenance

  MP560 Table OF CONTENTS 1. MAINTENANCE 1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer (ane) Adjustment Approx. Aligning Timing Purpose Tool time EEPROM - At logic board To initialize settings i min. Service Tool initialization replacement Perform in the service mode.
• Page 5 - At railroad vehicle unit replacement LCD linguistic communication - At logic board To set the language to be None. 1 min. settings replacement displayed on the LCD. Perform in the user manner. Platen glass - At protection sheet To maintain scanning None.

• Page half dozen: Customer Maintenance

  ane-two. Customer Maintenance Approx. Adjustment Timing Purpose Tool time Automatic print - At print head replacement To ensure authentic dot - i sheet of 6 min. head alignment - When print quality is not placement. patently paper satisfying (uneven printing, etc.) - Machine buttons - Computer...

• Page vii: Special Tools

  ane-3. Special Tools Name Tool No. Awarding Remarks To the carriage track sliding In mutual with the MP610, FLOIL KG-107A QY9-0057-000 portions. etc. i-four. Sensors Sensor Role Possible bug Scanner unit of measurement open Detects opening and endmost of - The carriage does not move to the center. sensor the scanning unit (cover).
• Page eight 5 / 64...

• Page 9: Serial Number Location

  1-5. Serial Number Location On the inner guide over the upper portion of the spur holder (visible when the scanning unit (cover) is opened) When the machine power is OFF. When the auto power is ON. <1. MAINTENANCE> 6 / 64...

• Page 10: List Of Error Brandish / Troubleshooting

  MP560 TABLE OF CONTENTS 2. Listing OF Error Display / TROUBLESHOOTING Errors and warnings are displayed by the following ways: 1. Operator call errors are indicated by the Warning LED lit in orange, and the error messages are displayed by the MP driver Status Monitor. ii.
• Page 11 of paper at mistake occurrence is skipped (not printed). Ink may have run [1600] U041 The post-obit ink Replace the applicable - Spur unit out. may have run out. ink tank, or printing the Replacing the ink Stop button to clear the tank is fault without ink tank recommended.
• Page 12 becomes total, no further printing can be performed unless the applicable ink absorber is replaced. The connected [2001] The device may be Remove the cable digital camera or incompatible. between the camera and digital video Remove the device the car. camera does not and check the support Camera...
• Folio 13 No ink (no raw [1688] U163 The following ink Replace the empty ink - Ink tank ink). has run out. Supplant tank(due south), and close the - Spur unit the ink tank scanning unit (cover). (Applicable ink tank Press with an empty icon) ink tank can damage the automobile.

• Page 14: Service Call Errors

  2-2. Service Call Errors (by Cyclic Blinking of Alarm and Ability LEDs) Service phone call errors are indicated by the number of cycles the Alarm and Power LEDs blink. Cycles of Solution blinking of Mistake Error Weather (Check points and Alarm and code replacement items) Ability LEDs...
• Folio fifteen 6 times Internal [5400] The internal temperature (i) Cable connectedness temperature is not normal. (2) Part replacement: mistake - Spur unit of measurement - Logic lath - Print head 7 times Ink absorber [5B00, The ink cushion is (i) Ink cushion condition total 5B01] supposed to be full.
• Page 16 14 times APP sensor [6A90] An error occurred during cushion right beneath the fault paper feeding or purge drive system unit purging. stays in identify and does not contact the unit. (2) Foreign cloth or newspaper debris around the ASF unit; remove foreign material.
• Page 17 23 times Valve cam [6C10] The valve cam sensor (1) Foreign material or paper sensor fault was faulty at ability-on droppings around the purge drive or when purging was system unit; attempted. remove foreign material. (2) Cable connection (three) Part replacement: - Purge drive system unit - Logic board Earlier replacement of the logic board donkey'y, bank check the ink absorber counter value (by...

• Folio eighteen: Troubleshooting By Symptom

  2-3. Troubleshooting by Symptom Symptom Solution Faulty operation The power does not turn on. (one) Ostend connection of the power supply The power turns off unit: immediately after power-on. - Harness and connector weather condition (2) Replace the post-obit item(southward): - Logic board - Power supply unit A foreign racket occurs.
• Folio 19 - Logic board Car non recognized by (1) Confirm USB cable connexion. a USB-connected PC (ii) Connect the machine to another PC to see if the car is recognized. (iii) Supersede the post-obit particular(south): - USB cable - Logic lath Unsatisfactory print quality No printing, or no color (1) Confirm the ink tank conditions:...
• Folio xx on printouts in the paper smearing or scratches: feed management. - Cleaning of the LF slit film.. (2) Supersede the following item(s): - LF slit film - LF timing sensor unit - Platen unit - Logic board - Scanner unit of measurement (for copying) Faulty scanning No scanning.

• Page 21: Repair

  MP550/MP558, MP560/MP568 Table OF CONTENTS 3. REPAIR 3-1. Major Replacement Parts (and Notes on Disassembling / Reassembling) Recommended removal Est. fourth dimension Service Adjustment / required procedure / Notes on Operation check office settings (min.) replacement Logic (i) Cassette unit After replacement: - EEPROM board ass'y (2) Operation panel cover /...
• Page 22 (x) Timing slit strap the wagon track. value, automatic print (11) Carriage rail [See 4-3. Grease head alignment (12) Wagon unit Awarding, for sensor value, and ink details.] system function.) - Before removal of the 2. Bank check the ink wagon rail, put a mark of system function.
• Page 23 plate) removal, for details. - See iii-2. Pars Replacement Procedures, (x) Engine unit reassembly, for details. Platen unit (1) to (9) Aforementioned as the logic Later on replacement: - EEPROM board ass'y 1. Perform LF / Squirt data print (10) Front door link (ii correction in the - Service exam print screws)
• Page 24 - See 3-ii. Pars Replacement Procedures, (x) Engine unit reassembly, for details. Carriage (1) to (9) Same as the logic At replacement: - Service examination impress rails and board ass'y 1. Apply grease to the main (10) Front door link (ii sliding portions.
• Page 25 Timing slit screws) correction in the service disk feed (5) Left comprehend (ii screws) mode (only when film (6) Document comprehend / uneven printing or Scanner unit streaks appear on (7) Main instance (3 screws) printouts subsequently replacement). - Upon contact with the film, [See four-two.
• Page 26 *1: To reassemble the unit later on replacement, follow the procedures in the reverse order. *2: Full general notes: - Make certain that the flexible cables and wires in the harness are in the proper position and continued correctly. Encounter three-2. Function Replacement Procedures or the Parts Catalog for details.
• Page 27 MP560 --- three. REPAIR TABLE OF CONTENTS 3-2. Function Replacement Procedures Be sure to protect the machine from static electricity in repair servicing, especially for the logic board. Some of the photos are of the MP540 every bit a sample. (one) External housing removal 1) Remove the cassette.
• Page 28 three) Remove the operation panel cover and the correct guide. <Open the scanning unit (cover). At the triangle marker on the inner correct side, push the right guide upward, and so release all the claws.> four) Remove the side cover R. <Remove ii screws from the back side of the machine, then release the hook on the front by pulling the side embrace R outward.>...
• Folio 29 5) Remove the side embrace L. <Remove 2 screws from the back side of the machine, so button the claws downward to release them.> 26 / 64...
• Folio 30 <Disengage the scanner stay.> half-dozen) Remove the functioning panel unit of measurement. <Printing the claw on the dorsum of the machine, so pull the functioning console unit upward while existence cautious not to impairment the hook (A) on the right front end of the operation panel unit.> 27 / 64...
• Page 31 <Remove 5 screws.> <Disconnect the FFC cable, then split up the operation console unit from the car.> vii) Remove the LCD unit of measurement. <Remove 2 screws.> 28 / 64...
• Page 32 <Unlock the LCD FFC, peel off the double-sided agglutinative tape at location (B), then remove the LCD unit of measurement.> viii) Disassemble the functioning console unit of measurement. <Turn the console unit over and so that you see the bottom of the unit. Release the claw (indicated by the red arrow in the photo), and remove the jog bike.>...
• Page 33 <Remove 4 screws, then the operation panel board.> <Remove a set of buttons.> xxx / 64...
• Page 34 9) Remove the scanner unit. <Disconnect the harnesses (two locations indicated by the reddish circles) and FFC (ane location). Remove one core.> 31 / 64...
• Folio 35 10) Remove the main case. <Remove two screws.> <Remove ane screw on the right side (on the purge unit side), release the claw on the left side, then remove the main instance.> 32 / 64...
• Folio 36 (xi) Remove the sub-case and the ASF embrace. <Release 2 claws on the dorsum side of the automobile.> <Remove the PE sensor FFC.> 33 / 64...
• Page 37 (ii) Cable wiring and connexion 1) Wiring on the correct side (with / without the bottom case) 2) Wiring on the left side (with / without the bottom instance) 34 / 64...
• Page 38 (3) Emblem removal Push the emblem bottom to remove from the double-sided adhesive record. (iv) Wagon unlocking 1) Rotate the bulldoze unit gear toward the back of the machine to unlock the carriage. Slide the carriage to the left (the opposite of the domicile position). 35 / 64...
• Page 39 (5) ASF unit removal one) Remove 1 screw from the left plate, and 2 screws from the right plate. (6) Right chassis removal 1) [MP560] 2) Remove the right chassis. (three screws) Remove the wireless LAN board. (1 screw) 36 / 64...
• Page 40 (7) Carriage unit removal 1) On the main chassis, mark the positions of the screws that fix the carriage rail to the main chassis (iii points for each screw: the left, right, and center). two) Remove the timing slit film. Be cautious to go on information technology gratuitous from whatsoever grease or damage. 3) Pass the head of a flat-blade screwdriver through the hole of the main chassis, and printing the carriage chugalug to release it from the pulley.
• Page 41 4) Remove the carriage cable holder from the front end chassis. Remove three screws that fix the carriage rail to the main chassis, and so slowly put downward the railroad vehicle runway. 5) Remove the carriage unit. Be cautious that the grease volition not attach to whatever parts. 38 / 64...
• Page 42 (8) Spur unit and platen unit removal one) Remove the ink sensor and the inner encompass sensor from the front chassis (1 spiral each). 2) From the left and right sides of the spur unit, release the springs (2 on the left side, 1 on the right side).
• Page 43 three) Remove the front end chassis. 4) Unlock the newspaper eject roller gear. While raising the front of the platen unit, remove the platen unit from the printer unit. 40 / 64...
• Page 44 (9) Purge drive arrangement unit (correct plate) and switch organisation unit (left plate) removal one) Release the springs of the carriage motor cable, duplex press paper feed roller, cassette feed roller, cassette feed guide, and newspaper guide unit (both sides). (See the Parts Catalog for details.) 2) Remove iv springs between the pressure roller unit and the chief chassis.
• Page 45 iv) Separate the main chassis from the switch system unit and the purge drive organization unit of measurement. Switch system unit: Purge drive system unit: 42 / 64...
• Page 46 (10) Engine unit of measurement reassembly Subsequently repair, reassemble each unit of the printer engine on the lesser case in the procedures listed below. Depending on the replaced unit, some steps can exist omitted. For specific part names and locations, refer to the Parts Itemize.
• Page 47 (11) Ink absorber replacement If the ink absorber lonely needs to be replaced (because the ink cushion becomes full, etc.) and no other engine parts are replaced, the ink absorber can be replaced only by separating the print unit from the bottom case.
• Page 48 3) Release the basis harness ass'y from the lesser instance, and slowly lift the print unit to separate information technology from the bottom case. Be cautious of the PictBridge lath. 4) Replace the ink absorber. Ostend that the replaced new ink absorber completely fits in place and is non lifted or dislocated. 5) While existence cautious of the ink tube and each harness location, return the print unit of measurement to the bottom case, and fasten the screws (removed in footstep 2).
• Folio 49 MP560 TABLE OF CONTENTS 4. Aligning / SETTINGS 4-1. User Mode Function Procedures Remarks Nozzle bank check Perform via the machine Set up a sheet of plain paper (A4 or Letter of the alphabet) in the cassette, or pattern operation panel, or from the the rear tray if selected. printing MP driver Maintenance tab.
• Page 50 four-two. Service Mode (1) Service mode operation procedures Use the Service Tool on the connected calculator. 1) Start the motorcar in the service mode. i. With the machine power turned off, while pressing the Stop button, press and hold the ON push button. (DO Non release the buttons.) ii.
• Page 51 (2) Service Tool functions Service Tool screen: Version one.05 48 / 64...
• Folio 52 Name Function Remarks (1) Test Impress Service examination print Paper (two sheets) will feed from the rear tray. Service test impress items: - Model name - ROM version - USB series number - EEPROM information - Process inspection data - Barcode (model proper noun + destination + motorcar series number) - Ink system function check result (2) EEPROM...
• Page 53 - Record of ink absorber counter resetting and setting - Record of repair at the production site - LF / Eject correction values - Left margin correction value - Product site Due east-MIP correction value and enabling of it - Endurance correction value and enabling of it - Record of disabling the role to detect the remaining ink amount - Ink cushion counter value (ink corporeality in the ink...
• Page 54 - Paper source: Select either Rear tray or Cassette. - Media type: Select one from Hour-101, GF-500/Office Planner, HP Bright White, and Catechism Extra/STEINBEIS. two) When press is finished, "A office was finished" is displayed on the reckoner, and the machine returns to be prepare for selection of another function.
• Page 55 (4) Button and LCD test Confirm the operation after replacement of the panel board or LCD unit. 1) Push button check 1-1) Click Panel Check of the Service Tool on the continued computer. All the automobile LED'due south plough on, and the machine LCD turns blue, waiting for a button to exist pressed. 1-2) Press each button of the operation panel, to run across if every push functions properly.
• Page 56 two) Easy-Scroll Wheel check two-1) Printing the OK button, then rotate the Like shooting fish in a barrel-Scroll Bike clockwise step by stride. The LCD is divided into six segments, representing each stride. The color of a segment respective to the stride changes from red to green. If the wheel is rotated counterclockwise before clockwise round completes, the color of segment(due south) respective to the number of steps the cycle is rotated counterclockwise returns to red.
• Folio 57 3) Transparent pattern display bank check iii-1) Press the OK button. "OK1" in white is displayed on the black background. If the effect is not good, "NG1" in black is displayed on the white background (transparent colour) immediately subsequently "OK1." Wait for approx. 2 seconds. three-two) Press the OK push.
• Folio 58 MP550/MP558, MP560/MP568 --- iv. ADJUSTMENT / Table OF CONTENTS SETTINGS 4-3. Grease Application Where to apply grease / Drawing Grease Role name Grease amount (mg) The surface where the Floil ane Carriage rail 230 to 290 carriage unit of measurement slides KG107A The surface where the Floil 2 Carriage rails...
• Page 59 56 / 64...
• Page 60 four-four. Special Notes on Servicing (1) Impress head problem (smeared printing, uneven press, non-ejection of ink, etc.) For problems that are supposed to be caused by the print head (smeared printing, uneven printing, or non- ejection of ink, etc.), print the nozzle check pattern to determine whether the impress head is faulty or non. <...
• Page 61 (iii) Carriage unit replacement To replace the carriage, the carriage rail must be removed from the main chassis (by removing the screws). Before removing the screws, put a mark on the main chassis to indicate the carriage runway position. After replacing the wagon, render the carriage rail to the original position while adjustment the runway to the mark on the chassis.
• Page 62 Table OF MP560 --- 4. ADJUSTMENT / SETTINGS CONTENTS 4-v. Verification Subsequently Repair (1) Standard inspection flow In each step below, confirm that printing is performed properly and the machine operates properly without whatsoever strange noise. EEPROM data print <Check point> - The information must be printed properly.
• Page 63 Ability-off in the service mode <Check point> - The newspaper lifting plate must exist in the raised position. External and internal advent <Bank check indicate> - No grease, oil, or smearing on the timing slit strip motion-picture show. - No lifting of the platen ink absorber. - No strange material or dislocation of any part inside the printer.
• Page 64 (ii) Service examination print <Service examination print sample> (MP550) - First folio: 61 / 64...
• Page 65 - 2d folio: 62 / 64...
• Page 66 (3) Ink absorber counter value print <Impress sample> <4-five. Verification Items> 63 / 64...
• Page 67 MP560 TABLE OF CONTENTS 5. Motorcar TRANSPORTATION This department describes the procedures for transporting the automobile for returning after repair, etc. 1) In the service mode, printing the ON button to cease the mode, and confirm that the paper lifting plate of the rear tray is raised.

Source: https://www.manualslib.com/manual/989824/Canon-Pixma-Mp560.html

Posted by: martinezlech2001.blogspot.com

Share this post